Highlight: | 100KU Paint Building Materials,Paint Building Materials Interior Wall,Interior Wall Paint Plasterboard Protection |
---|
COLOR: White and the standard colors shown in the color card, special colors can be configured according to customer requirements
COMPOSED OF: propionic acid emulsion, film-forming aids, defoamers, thickeners, leveling agents, color fillers, etc.
USE: It is an ideal coating for the protection and decoration of indoor cement walls, ceilings, gypsum boards and other surfaces.
PERFORMANCE: Strong hiding power, good adhesion, alkali resistance, waterproof, scrub resistance up to 5000 times, easy to apply
work
Parameter | Value |
---|---|
Low temperature film forming | no abnormality in film formation at 5°C |
Theoretical dosage | 10-12 ㎡/L (coating film thickness 35μm, depending on the surface condition) |
Viscosity | 85-100KU |
Drying time |
25℃ (surface dry≤20 min, hard dry≤1h)
|
Gloss | matte |
Drying time | 25℃ (surface dry≤5 min, hard dry≤15min) |
Painting interval | 25℃ 4h |
Construction environment | The temperature is not lower than 0°C, not higher than 40°C, and the air humidity is not higher than 70% |
Coating method | Brush, Roll or Spray |
Recommended number of coats | 2 coats |
Equipment cleaning and thinner | Water, Dilute with 10-15% water, stir well before use |
Surface treatment | First remove surface grease, dust and loose powder, and then apply after drying |
Storage period | 12 months, if it exceeds the period and passes the inspection, it can still be used |
Package Size | 1 gallon, 5 gallon |