Products Description

Name: Extrusion Grade HDPE Resin 5000S Plastic Raw Material High Density Polyethylene 0.951 Density MFI 1
Brand: Chongyuan
SKU: HDPE
Price: 1 USD
Availability: InStock
Rating: 4.6 (128 reviews)

HDPE is a white powder or granular product. Non-toxic, tasteless, crystallinity of 80%-90%, softening point of 125-135℃, use temperature up to 100℃; hardness, tensile strength and creep are better than low density polyethylene; abrasion resistance,electrical insulation, toughness and cold resistance are better; chemical stability is good, at room temperature, insoluble in any organic solvent, resistant to corrosion of acid, alkali and various salts; film permeability to water vapor and air It is less resistant to aging and less resistant to environmental stress cracking than low-density polyethylene, especially thermal oxidation will cause its performance to decline, so the resin must be added with antioxidants and ultraviolet absorbers to improve the deficiencies in this regard, and high-density polyethylene film has a lower heat deflection temperature under stress.

Extrusion Grade HDPE Resin 5000S Plastic Raw Material High Density Polyethylene 0.951 Density MFI 1 0

Extrusion Grade HDPE Resin 5000S Plastic Raw Material High Density Polyethylene 0.951 Density MFI 1 1

Extrusion Grade HDPE Resin 5000S Plastic Raw Material High Density Polyethylene 0.951 Density MFI 1 2

Products Application

Typical applications for HDPE include corrosion-resistant industrial piping for drinking water and sewage, geomembranes, hollow containers, and various extrusion and injection molding uses. Due to its chemical resistance, HDPE is a popular material in general household and consumer applications, such as plastic packaging containers for detergents, cleaners, shampoos, antifreeze and motor oil.

Extrusion Grade HDPE Resin 5000S Plastic Raw Material High Density Polyethylene 0.951 Density MFI 1 4

Properties

Virgin HDPE Granules Characteristic

This HDPE granules is the extrusion, pipe grade with good weather resistance,good dispersion of black carbon also excellent resistance to rapid crack propagation resistance and slow crack growth performance.

Blow molding grade,
Injection molding grade,
Film grade,
Extrusion grade.

HDPE Cable Material Property	Unit	Typical Value
Mass Density	g/cm³	0.941-0.959
Melt Flow Rate(190 Centigrade /2.16kg)	g/10min	≤1.0
Tensile Yield Strength	MPa	≥19.0
Flexural Modulus	Mpa	≥965
Elongation at Break	%	≥400
Impact Embrittlement Temperature	Centigrade	MAX -118
Dielectric Constant	100KHZ	2.32
Dielectric Constant	1MHZ	2.31
Loss Tangent	100KHZ	MAX 0.0001
Loss Tangent	1MHZ	MAX 0.0001
Volume Resistivity	OHM-CM	MIN 1x10 15

Item	Test method	Test data	Data unit
MFR(190ºC,2.16KG)	ASTM D1238	0.3	g/10min
Density	ASTM D792	0.956	g/cm³
Tensile yield strength	ASTM D638	25	Mpa
Tensile breaking strength	ASTM D638	38	Mpa
flexural modulus (2% secant)	ASTM D790	860	Mpa
Elongation at break	ASTM D638	950	%
Environmental stress cracking resistance (50°C, 100% Igepal, F50)	ASTM D1693	>200	hr
Vicat softening point	ASTM D1525	128	ºC
Notched impact strength of cantilevered beams(23ºC)	ASTM D256	130	J/m
Shore hardness(D)	ASTM D2240	66

PROCESSING RECOMMENDATIONS:

Processing temperature: 195 – 220 ℃

Certifications

As a responsible manufacturer, Chongyuan adheres strictly to RoHS as our baseline environmental policy. Protecting the environment is fundamental to our operations. We are committed to never purchasing, using, making or selling materials or products containing hazardous substances banned for environmental reasons.
Our production meets - and can be customized to exceed - our customers' environmental standards. Upon request, we provide inspection reports for:
• RoHS compliance
• Halogen content
• REACH restrictions
• PAH, TBBP-A and heavy metal levels
• Food contact safety
• PFOS/PFOA concentrations

Chongyuan is committed to delivering products of the highest quality. We have established a best-in-class quality management system, leverage advanced production technologies, and conduct rigorous testing. A knowledgeable and seasoned team applies the PDCA methodology for the continuous improvement of our products, services and internal processes to exceed our customers' highest expectations.

Our aim is to provide genuine and authentic value and satisfaction to our customers. To this end, we remain dedicated to supplying products and services characterized by sincerity, integrity and trustworthiness. Relentless innovation drives our solutions forward, enabling us to deliver maximum value and satisfaction for our customers through our excellence in quality and service.

FAQ

Q1: Are you a factory or a trading company?
A: We have over 19 years of professional production and business experience in the petrochemical and chemical products industry. We have strong relationships with manufacturers as partners. If you are interested, we welcome you to visit our partners' plants.

Q2: What is your product range?
A: We specialize in plastic products and fine chemical products. Our product range includes PC resin, PA resin, PET resin, PETG resin, acrylic resin, PBT resin, polyester/PETG/PC board series, BOPET/PETG high shrinkage film/BOPP film series. We are also developing fine chemical products such as food additives, including taurine.

Q3: What are the strengths of your products?
A: Our products offer a combination of high quality and competitive prices, along with professional after-sales service.

Q4: How about the lead time?
A: We can provide samples immediately. For mass production, it generally takes 5-10 working days after receiving your initial payment.

Q5: Do you have any MOQ (Minimum Order Quantity) limit and provide samples? Is there a charge for samples?
A: The MOQ for PETG resin is 1000 kg, PET resin is 1100 kg, PC/PA/PVC is 25 kg, etc. Additionally, we can provide samples free of charge, but the freight charges will be collected.

Q6: What are your payment terms?
A: We accept various payment methods, including T/T, D/P, L/C, and Western Union. Please contact us for more information on payment options.

Q7: How do you handle quality problems and claims?
A: We only sell products from reputable brands, ensuring excellent and stable quality. Additionally, we conduct business based on Alibaba Trade Assurance, which safeguards the buyer's payment to suppliers and ensures that suppliers fulfill their obligations regarding order delivery and product quality.

Q8: What quality control measures are in place for your plastic raw material products?
A: We have established a best-in-class quality management system and conduct rigorous testing to ensure that our masterbatch products meet the highest standards. Our knowledgeable and experienced team applies the PDCA methodology to continuously improve our products and processes.

Tag:

Place of Origin:	China
Brand Name:	Chongyuan
Certification:	RoHS, ISO, CE, Reach/ DINP
Model Number:	HDPE

Minimum Order Quantity:	25TON
Price:	1,050-1,070 USD/TON
Packaging Details:	25kg/Bag
Delivery Time:	7-15 workdays
Payment Terms:	T/T, L/C
Supply Ability:	100,000 TONS/MONTH

Color:	Natural	Grade:	Hollow
Application:	All Kinds Of Plastic Products	Availability:	Widely Available
Surface Finish:	Smooth	Resistance To Impact:	High
Recyclable:	Yes	Description:	Plastic Resins
Impact Resistance:	High	Packing:	25kg Per Bag,Customer Demand
Form:	Granule/Pellet	Ease Of Processing:	Easy To Process
Durability:	High	Weight:	Lightweight
Waterproof:	Yes	Cost:	Affordable
Strength:	Strong
Highlight:	High Density Extrusion Grade HDPE Resin , 0.951 Density Extrusion Grade HDPE Resin , MFI 1 Extrusion Grade HDPE Resin

	Chongyuan(Xiamen)Fine Chemical Co.,LTD.
	Room 1604,No.491,Gaolin Middle Road,Huli District,Xiamen
	86--18850173526
	donmy@chongyuanchemical.com

Extrusion Grade HDPE Resin 5000S Plastic Raw Material High Density Polyethylene 0.951 Density MFI 1

High Density Extrusion Grade HDPE Resin

0.951 Density Extrusion Grade HDPE Resin

MFI 1 Extrusion Grade HDPE Resin

Products Description

general polymers epoxy

general polymer

general plastics